Hey all I collected playing card decks and had been using a vintage cassette storage display for my decks. I decided I had enough and designed this modular playing card deck display.

There are lots of pieces and combinations here, for everyone.

You have the following options:

1x Single Deck Display (hanging or standalone)

1xN Single Row Deck Display (hanging or standalone)

2x2 Deck Display (hanging or standalone)

3x3 Deck Display (hanging or standalone)

NxN Deck Display (hanging or standalone).

Optional Full design through all inside walls, or faster printer with inside walls solid

Solid inner walls.                           Full design passthrough.


There are also included hanging holders that can be used to replace a standard holder in the display (be sure to preplan carefully, so you don't have to disassemble to move the hanging holders.)



Everything should be plated and labelled. If you want to make a 1x, 2x, or 3x it is all laid out on plates, if you want an NxN you will have to choose which additional ones you need to make your display.

This image shows how the back clips go together (back down), left to right, top to bottom.

The deck holders should be attached (back down) from the right to the left, sliding the left on onto the front of the right one. Then attaching the row above from bottom to top.

You can optionally reverse the assemble doing it face down and place the back clips down one at a time after you assemble the holder display. The back clips go on easier for large builds this way (one at a time, rather than a sheet or risk breaking the back frame).

Finally you can clip the front clips on to help lock it all in.

There you go, a tasteful modular playing card deck display. Thanks for printing!

Please do not remix, reupload, or sell my models anywhere. I am sharing this for you to print for yourself or a gift.