Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 128.57x225mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Jessie Premium Purple Ice Transmission Distance: 18
    PLA Kexcelled Sky Blue Transmission Distance: 2.6
    PLA Prusament Galaxy Green Transmission Distance: 3.2
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 4.7

This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Purple Ice
    At layer #14 (1.2mm) swap to Sky Blue
    At layer #15 (1.28mm) swap to Galaxy Green
    At layer #17 (1.44mm) swap to Yellow
    At layer #25 (2.08mm) swap to Jade White for the rest.