Book keychain with different print profiles.

Due to enormous material waste if you use an AMS, I purposefully did not include an AMS variant. If you really want to use about 90g instead of 2g, you can download the raw files and assemble them in Bambu Studio.

Instructions for different print profiles

General Assembly

Print the plates separately in different colours. You can slide the pages, with hook, in the cover and secure it with some superglue. Please check first below how to assemble your pages and hook. Every print profile is one of these.

With pause

For stability, the hook in the pages is printed separately. There is a pause inserted. At the pause, remove the hook from the bed with a scraper and place it tightly inside the hole, with or without a little superglue or sanding. After that, you can resume printing. If your printer didn't pause, go to “No pause”. When the print is ready, go back to “General Assembly”.

No pause

For stability, the hook in the pages is printed separately. You can slide the hook in, with or without a little superglue or sanding. When assembled, go back to “General Assembly”.

One piece

Please mind that the one piece version is not stable! Consider choosing another print profile. 

You don't need to assemble the hook, so you can go back to “General Assembly”.