These models are prototypes made for educational purposes, and three types were made for design research as well. There are three types: Normal (plain), Crystal, and Scale armor. Also, to make it easier to see how the joints work, the ring is designed to be visible.

Print in Place with no supports. No assembly required. Please take pictures of your Flexi and share them with us!

---------------------------------------------------------------------------
👨🏫Original plan👨👨👧👦
This model was created for a work project to create an original Flexi by interchanging the head, body, and tail.
We actually tried this work with adults only and found that it took a surprisingly long time to learn how to operate TinkerCad, and that it was difficult to adjust the position of the parts so that their joints did not interfere with each other.
It would have been nice if we could have added a kind of snap point at a specific coordinate to attach the parts at a fixed position, but unfortunately, I found that such a thing was not possible, so we decided to abandon this work.

---------------------------------------------------------------------------
💰Commercial Use💰

This model is not available for commercial use under "Standard Digital File License" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory.

[https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver](https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver) 
[https://flexseedsshop.etsy.com](https://flexseedsshop.etsy.com) 
[https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver](https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver) 

On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁
In addition, you can get monthly exclusive models and generous welcome pack!!
[https://www.patreon.com/FlexSeeds](https://www.patreon.com/FlexSeeds) 

---------------------------------------------------------------------------
⚠Warning⚠
Be careful in environments with young children and pets! 
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

---------------------------------------------------------------------------
🖨Print Setting🧵
　Infill:15-20%
　Filament material: PLA

[Layer Height]
　Layer Height: 0.2mm
　Initial Layer Height: 0.2mm
[Seam]
　Seam Position: Aligned
[Walls]
　Wall Loops: 2
[Initial layer Speed]
　Initial layer: 30mm/s
[Other layer Speed]
　Outer wall: 30mm/s
　Overhang Speed: 0, 30, 10, 10, 10mm/s [10%, 25%, 50%, 75%, 100%]
　Bridge: 30mm/s
[Acceleration]
　Outer Wall: 2000mm/s^2
[Support]
　Enable Support: none
[Raft]
　Raft Layers: 0 layers (none)
[Bed Adhension]
　Brim type: No-brim
[Prime Tower]
　Internal ribs: none
　Width: 15mm
　Brim Width: 0mm (none)
　Infill Gap: 100%
　Rib Wall: none