— Important — 

There is a “Multi Colored” and “One Color” version. The “Multi Colored” print poops a lot so keep that in mind before deciding if you want to print it. If you are gonna print the “Multi Colored” version I recommend to print multiple to reduce the amount of waste per model. Another option is to add another object to the buildplate and use "flush into this object". That way less filament is flushed/wasted.

   _________________  

Sadly this is a quite long print in the multi colored version from all the diffrent colores at different layers :/

If you experience any issues with the print, please leave feedback so that I can try to solve it, same goes if you have suggestions on how to improve the model!

Here are the settings I used on my A1:

Prime tower - On.

Z hop when retracting - 0.4mm.

Seam - Back.

0.12 layer height.

Ironing - On (20% flow), line spacing 0.13.

2 walls, 15% infill - Gyroid.

Flush into objects infill - On.

Brim type - Outer brim only. Brim object gap 0.2mm.

I printed with Matte PLA. Ivory White, Charcoal Black, Latte brown and Dark Brown.