The Borg cube model [https://makerworld.com/en/models/1450754-resistence-is-futile-light-up-borg-cube#profileId-1511174](https://makerworld.com/en/models/1450754-resistence-is-futile-light-up-borg-cube#profileId-1511174) is excellent.

I wanted to make it fly, or levitate to be precise.

I created some adapter pieces to make it compatible with the mag lev kit from Maker's supply [https://eu.store.bambulab.com/fr/products/magnetic-levitation-diy-kit?id=43072975929480&modelId=759193](https://eu.store.bambulab.com/fr/products/magnetic-levitation-diy-kit?id=43072975929480&modelId=759193) .

I contacted the original author and he agreed for this upgrade.

How to print the borg cube:

You need the orignal model and print and glue plate 1 (the sides of the cube)

There is color change at layer 7 to go from green to black

Then print my model, plate one with the new bottom plate and the top plate

There is color change at layer 7 to go from green to black

Then print the magnet adapter

Then glue the top and bottom part to the cube.

Assemble the magnet holder from

 to 

by inserting the magnet holder and turning it slightly.

Once done, setup your levitating kit as usual, positionning correctly the magnet can be challenging.

Then just put the borr cube on top and tada here is the levitating borg cube. 

Resistance is futile, you will be assimilated…