v2 now available with support for Bordeaux expansion: 
Viticulture Wine Crate Insert v2

Viticulture Wine Crate insert, supports any and all editions and expansions for Viticulture: Essential Editions, Kickstarter editions, and Tuscany and Viticulture World expansions. Supports sleeved cards and vertical storage. 

The card trays come in divided + labeled version, divided + no labels, and no divider version (for those of you that want to make your own card dividers). The orange card trays shown in my images are prototypes, the final version is 10mm taller, see the final picture with grey and black card trays for an example of the final version's size. The taller card trays allow for tall card dividers, and are also easier to grab and remove from the box. (I didn't want to reprint everything, so I just used a 10mm spacer at the bottom of my personal copy).

I recommend printing everything with 0 bottom layers to save on filament, unless you have adhesion issues. Spacers can be printed with no top layers and less infill.

If you don't have all the extra content from the KS Tuscany edition, you will have some empty spots and will need some extra spacers to fill the box (such as the spacer to replace the Formaggio/Arboriculture boards). 

This insert should fill the entire volume of the box, assuming that you have Viticulture + Tuscany + World. If you don't have Tuscany or World, you will need to make your own spacer to fill the spot where the game board is missing. Here's a link to the OnShape project if you want to edit your own copy or export it as a different file type.