Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 159.97x200mm in size
You may print at higher layer heights below the Base Thickness of 0.56mm
The Max allowed Thickness is 2mm and the Actual Thickness is 2mm

Filaments Used:
    #080a0d PLA BambuLab Matte Charcoal or Black Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #cd007b PLA BambuLab Basic Magenta  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #12 (1.04mm) swap to Magenta
    At layer #16 (1.36mm) swap to Jade White for the rest.