Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
Elevate your handheld shooting game with this sleek, Camera Top Handle—designed for makers, videographers, and hobbyists who demand both form and function. This lightweight, yet rock‑solid handle snaps effortlessly into any standard camera hot‑shoe, instantly transforming your rig into a more stable, professional setup.
Key Features:
- Custom‑Designed Grip: Ergonomic curves and generous finger relief for all‑day comfort, whether you’re roaming city streets or scaling mountain trails.
- Precision Fit: Engineered to slide securely into any universal hot‑shoe mount—no wobble, no fuss, just rock‑steady stability.
- Modular Mounting Points: 1/4″‑20 and 3/8″‑16 UNC threaded holes located on each side allow you to attach lights, microphones, monitors, or any 3rd‑party accessories you need.
- Durable, Lightweight Material: Printed in PLA meta for a crisp finish—though we recommend using PETG for maximum toughness and heat resistance.
Why You’ll Love It:
- Instant Stability Boost: Say goodbye to shaky footage—capture buttery smooth pans and accentuated cinematic moves.
- Fully Customizable: Modify your own version in seconds—open‑source STL file included so you can tweak length, width.
- Affordable Pro Upgrade: Get that SmallRig look for a fraction of the price.
Important Notice:
While this handle is rigorously tested for strength and durability, it’s designed to support typical camera setups. We do not assume responsibility for any damage to your camera or accessories if the combined weight or configuration exceeds the handle’s load capacity.
How I thought about designing it: In the past few days I wanted one but instead of just buying it online I started designing it in fushion 360 with all of my creativity.I came up with two versions but I only included the 2nd one.The first version was snapping in the hot shoe without the need of any hardware.It wasnt the best in terms of streght so I came up with the version two which uses an hot shoe adpter that snaps on the top of the camera and it has a screw socket underneath it so by adding the screw and then the nut on top of the handle it increases its strength.
Print: I printed it with pla meta but I suggest to print it with petg to increase the strength and the toughness.I used extra fine profile and also used ironing on top surfaces to make it as smooth as possible.All the settings I printed it with can be seen if you select to print it using my print profile(recommended)
Assembly:
Step 1: Get the hot shoe adapter and flip it so you are holding the surface it printed, grab the screw (Either 15mm either 20mm) and press it so it snaps on the bottom of the adapter, as shown below.I suggest you to add force to the desk and you will hear a snap that the screw is in place.
Step 2: Slide the hot shoe adapter on top of the camera
Step 3: Instert on top the camera handle with the orientation you want
Step 4: Screw the nut to secure the handle in place
If you printed the 20mm screw follow the same steps but instead screw both of the two nuts on top
Note: You might find difficult to screw the nut because I made it to tight to fit so it is more durable.So I suggest you before doing any of the above steps to use a plier by grabing the nut and rotating it slowly around the screw as far as you can, that will result it to be screwable with hands
If you now want to make it more reliable and strength resistant I suggest you to buy a metalic hot shoe screw which you can find for really cheap in aliexpress.Then you can adjust the model dimensions to your needs so the metalic adapter fits well with the handle.Here you can find some metalic hot shoe screw adapters:
