Stackable/modular geometric storage container/organizer with lid and decorative octagram star pattern* inside and on bottom. There are two styles and each style has a base, three different sized centers, and two different lid options. The pictured boxes are 2.75" wide and can be scaled up, but I would not recommend scaling them down further as the grooves where they connect together will be too small and supports will already require some tweezers or very small nosed pliers to remove.

NOTE: The lids may have some minor stringing on the inside depending on the dryness and/or settings/calibrations of your chosen filament- these are easily nipped off and should not interfere with the function. The lids are intended to be a bit snug, though the texture of the matte PLA in particular may make the lid difficult to remove the first couple times. It should loosen a bit each time and I found that spinning/rotating the lid while on one of the middle pieces or base usually helped mellow the seams and reduce extra friction fairly easily. If that doesn't work will enough, you can also considering doing some minor sanding- but don't overdo it or the lid may become too loose.

If you like this trinket box/container and/or the geometric style, there are many more models from this series on my profile page!

*Provided print profiles have specific by-object settings to ensure the decorative detail prints properly- please note that the star pattern will not show on the plates until you slice it. Dual or tricolor filaments are recommended for best visual results as single color or gradient filaments will not produce the same multi-color faceted effects as shown in some of the pictures.