High poly Terminator T-800 (T2) bust.

Fully reworked resin model that can be printed on FDM printers. Added holes for LEDs lights. 

Printed with Bambu Silk+ Titan Gray.

The printing profile position is the most optimal in the amount of supports, time and filament waste: 322g - model and 120g - supports.

Be careful with removing supports, it's a convoluted process that needs patience and attention to the details.

If you wanna use standard 5mm diodes, please print with the profile scale.

Note: For easier support removal, I recommend running the Support Removal Test before printing. 

It only uses ~45g of filament and takes about 1.5 hours. [https://makerworld.com/en/models/2573276](https://makerworld.com/en/models/2573276)

DC-DC: [https://www.aliexpress.com/item/1005006335865184.html](https://www.aliexpress.com/item/1005006335865184.html)
LEDS: [https://www.aliexpress.com/item/32911107474.html](https://www.aliexpress.com/item/32911107474.html)
USB: [https://www.aliexpress.com/item/1005008391108615.html](https://www.aliexpress.com/item/1005008391108615.html)
Resistors: [https://www.aliexpress.com/item/1005006706508149.html](https://www.aliexpress.com/item/1005006706508149.html)

LED wiring schema: