This is Mob (Shigeo Kageyama) from mob psycho 100. this is based off a screenshot from the anime.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 230x129.38mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #f5547c PLA BambuLab Basic Hot Pink  Transmission Distance: 3.9
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #15 (1.28mm) swap to Hot Pink
    At layer #20 (1.68mm) swap to White for the rest.

 

Those are just the filaments i had on hand. use whatever you want.

If you dont like the pink, replace it with a light red.

To scale it, change the x and y dimensions, do not change the z dimension.