Hueforge of Alucard from hellsing by artist K-Suwabe

The photos shows the result in 141x200mm and a nozzle of 0.4

You can change the X and Y dimensions but do not change the Z dimensions  
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.  
You can use filaments other than those indicated, but the result will differ.  
You can use any black PLA

Hueforge description
v1

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 141.45x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #18 (0.84mm) swap to BambuLab Basic Blue Gray
    At layer #26 (1.16mm) swap to BambuLab Basic Black
    At layer #27 (1.2mm) swap to BambuLab Basic Red
    At layer #37 (1.6mm) swap to BambuLab Basic Blue Gray
    At layer #45 (1.92mm) swap to BambuLab Basic Jade White for the rest.

v2

Differences from v1

The model is slightly thicker and remains rigid in the hand.

I had to lighten the image to bring out details on the costume, and the image has a more grayish tone.

Print speed is reduced and printing time is increased by 1 hour and 30 minutes (mainly due to the addition of details).

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 141.45x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.4mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #18 (0.88mm) swap to BambuLab Basic Blue Gray
    At layer #25 (1.16mm) swap to BambuLab Basic Black
    At layer #26 (1.2mm) swap to BambuLab Basic Red
    At layer #36 (1.6mm) swap to BambuLab Basic Blue Gray
    At layer #44 (1.92mm) swap to BambuLab Basic Jade White for the rest.