You know that feeling when you go on vacation and you miss your 3d printer that is waiting for you to come back? Well here is my idea to deal with it. A 3d printer shaped toy. It is safe and easy to use. Just grab some sand or water, add it to the extruder and have fun. Aditionally there are two accessories to use with the printer. First one is a “swing” that is moving from side to side as it fills with water/sand. Second one is a spinning fan. 

CAUTION!!! The nozzle size is 4mm so always use the strainer when playing with sand to avoid clogging the nozzle.

Parts needed:

• M3x20 (mm) screw x8
• M3x10 (mm) screw x11

Assembly instructions:

Remember not to use too much force when assembling!

	First thing to do is screwing the heatbed to the base using three M3x10 screws.
	Next set the frame in place.
	Fasten it with two M3x20 screws.
	Now take the X axis and two Z axis rods and fasten them using four M3x10 screws. Each rod has two holes matching with holes in X axis.
	Next you have to place the assembled X and Z axis in the prepared holes in base.
	Fasten it with two M3x20 screws.
	Take the two Z axis mounts and place them on top of each rod just like on the image.
	Next fasten them to the rods with two M3x20 screws and to the frame using four M3x10 screws (be sure to put the screws` heads on the marked side of the frame).
	Add the funnel and strainer.
	Last thing to do is to assembly the accessories using one M3x20 screw for each of them.    Note: The swing must be mounted on a base with limiters to work properly.