Project: LUFFY Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #c00d1e PLA BambuLab Basic Red  Transmission Distance: 4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.8mm) swap to Red
    At layer #15 (1.36mm) swap to Jade White
    At layer #19 (1.68mm) swap to Black
    At layer #25 (2.16mm) swap to Blue Gray
    At layer #28 (2.4mm) swap to Jade White for the rest.