This design improves access to the Mac Mini's power button, especially useful when the device is mounted or placed in hard-to-reach positions. The extender installs in the same corner as the original button and works via a fully mechanical system—no electronics required.

In addition to functionality, the model slightly elevates the Mac Mini, helping to improve airflow underneath the device. This passive cooling benefit can contribute to better temperature management during extended use.

Compatibility:
Compatible with all Mac Mini models that have the power button located on the lower back corner, including M1, M2, and similar versions.

Assembly Instructions:

• Requires 2x M2 screws, 20 mm long to secure the extender.
• Alternatively, you can use 2 pieces of 1.75 mm filament, cut to 20 mm in length.
• Designed for printing with minimal supports.

Printing Recommendations:

• Recommended materials: PETG or ABS
• Layer height: from 0.2 mm and up
• Infill: 15–30%
• Supports: Only if your printer setup requires them

Additional Notes:
✔️ Tool-free activation of the original power button
✔️ Boosts passive airflow
✔️ Clean and functional design
✔️ Tested and confirmed on Mac Mini M1; works on any model with the same button placement