Entrar

Você está no 3DFinder

Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.

Buscar mais como este

Descrição

Universal Cable Holder – V2

💡Description

Hello community,

the Universal Cable Holder V2 prevents cable clutter and keeps them securely in place.

You can use it to attach cables up to a diameter of 8 mm.

All print profiles have been tested by me with the A1 Mini and work perfectly.

↔️Differences

⬇️🔴Reduced stability due to wall interruptions during printing🔴⬇️

👉Instruction

Have fun with the model!

I would greatly appreciate any feedback.

Should there be any problems, please contact me!

🔎 Feel free to check out my other models!

MakerWorld

universal cable holder V2

Pixl

Publicado em 26 de jun de 2025

3,524

Curtidas

21,099

Downloads

11,300

Coleções

17,082

Impressões

Categoria Organizers

Tags

cable holder cableholder kabelhalter cable hanger cablehanger cable clip cableclip cable clamp wire holder wireholder wireclip cable clips cable clip 3mm cable organizer cableorganizer cable organiser cableorganiser cable organization cableorganization desk organizer deskorganizer desk organiser deskorganiser deskorganisers desk organization deskorganization desk organisation deskorganisation desk cable management deskcablemanagement cable management cablemanagement cable managment cable manager cablemanager organizer organizer cable cable accessories universal cable organzier workspace organization desktop accessory cable tidy office organizer wire management storage solution electronics accessory home office tech accessory cord management

Licença Standard Digital File License

Ver no MakerWorld

Gostou deste modelo? Crie uma conta grátis para salvar seus favoritos e voltar a eles depois.

Criar conta

Comparar agora

V1	V2
Flexibility
More flexible due to thinner wall of the clips (≈0.45mm)	Stiffer due to thicker wall of the clips (≈0.60mm)
Stability By making slight adjustments to the model and the printing settings, the stability could be significantly increased.
⬇️🔴Reduced stability due to wall interruptions during printing🔴⬇️ ⬇️🔴Reduced stability due to wall interruptions during printing🔴⬇️	⬆️🟢Greatly increased stability due to continuous walls🟢⬆️ ⬆️🟢Greatly increased stability due to continuous walls🟢⬆️
Print time The printing time has increased slightly, by an average of 3.31%, as the clips in particular require more time, and the infill has also been increased to 20%
Printing time (with preparation time) 2 Clips - 16m59s 3 Clips - 17m42s 4 Clips - 19m0s 5 Clips - 20m29s 6 Clips - 21m34s 7 Clips - 23m9s 8 Clips - 24m0s 9 Clips - 25m53s 10 Clips - 27m19s 11 Clips - 28m48s	Printing time (with preparation time) 2 Clips - 16m47s ⬇️🟢-1,18 % 3 Clips - 17m40s ⬇️🟢-0,19 % 4 Clips - 18m46s ⬇️🟢-1,23 % 5 Clips - 20m33s ⬆️🔴+0,33 % 6 Clips - 22m23s ⬆️🔴+3,79 % 7 Clips - 23m48s ⬆️🔴+2,81 % 8 Clips - 25m51s ⬆️🔴+7,71 % 9 Clips - 27m22s ⬆️🔴+5,73 % 10 Clips - 28m54s⬆️🔴+5,79 % 11 Clips - 31m33s⬆️🔴+9,55 %

Print I recommend using PLA, especially matte PLA, as this material makes the print layers less visible. Please make sure that the printing plate is clean and free of grease so that the first layer adheres! A considerable increase in surface quality is achieved with the Bambu Smooth PEI Plate!
⭐Bambu Textured PEI Plate ⭐	⭐⭐ Bambu Smooth PEI Plate ⭐⭐	❌Top: no adhesion on the first layer❌ ✅Below: Perfect adhesion of first layer✅
Prepare My recommendation is the Tesa tesafix 4965 with a width of 12mm! - This gives you 1.5mm space on each side because the cable holder is 15mm wide. It is also inexpensive and has very strong adhesion.
🦾 Tesa tesafix 4965 🦾	🤏 Width of the adhesive tape 12mm 🤏	✅ Peel off, stick on, done ✅
Attach Make sure that the surface on which you want to stick the cable holder is free of dust and grease! Furthermore, flat and smooth surfaces are highly recommended!