I'm very excited to release our customizable spinners! 

I did a few of these for my clients but I didn't have an easy way to customize them. I always end up spending a lot of time in Fusion 360 just to change the logo. I also listed down some of the disadvantage in doing a print-in-place design like these.

• The bottom print can get messy from stringing due to color changes
• The bottom does not have the same texture as the top
• having different color rings takes too much time to print on single extruder printers
• If you make a mistake, you have to reprint the entire plate. (I had 2 hour power failure when I printed my own designs and I had just added the NFC cards. The print resumed when the power came back but it resulted in a layer shift and the middle ring did not spin)

These modular spinner solves most of the problem listed above. The only disadvantage that I saw was that you'd have to print the parts in 3 different plates and assemble them.

Below is a tutorial on how to add your own designs. It has to be in SVG format. I edit in Adobe Illustrator and then export the files as SVG.
 

To assemble your keychain, please follow the short tutorial in the video below.

Note:

You have to have a really clean bed to print the rings, otherwise, use a brim.

Print Features 

• Designed for easy printing, we printed at 0.2mm layer height with standard 0.4mm nozzle
• Pocket-sized design with a built-in keyring hole.

Have fun😃 If you want to support me you can simply follow, boost & like the model. 

Ways to support my work & Commercial License

• Give this model a like - it helps promote it to people!
• Boost this model - if you enjoyed and printed it. This will help inspire me to continue making more models.
• Sell Physical Prints of my Models - Subscribe to my Patreon Membership so you can sell physical prints of my designs