10 teams are available on maker world.  The additional 22 are available through my patreon.

Subscribing will give you access to the additional teams, in addition to commercial rights.

 The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic BambuLab Green Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Jade White
    At layer #19 (1.6mm) swap to BambuLab Green
    At layer #23 (1.92mm) swap to Yellow
    At layer #25 (2.08mm) swap to Jade White for the rest.