D-Shaped Modular Moss Pole

Give your houseplants the support they deserve! This 3-piece, D-shaped moss pole combines a minimalist look with serious stability:

Part	What it does
Front Trellis	Open hex-grid lets aerial roots grip firmly while showing off the moss / substrate inside.
Backing	Flat rear sits flush against the pot wall, saving space and preventing wobble.
Anchor	Slides under the potting mix to lock the pole in place; no more tipping plants.

Zip-tie slots are built into every section so you can click + cinch the pieces together in seconds—no glue, screws, or special tools.

Zip Tie — Zip tie the backings with the trellis with 4 zip ties per side.
Anchor — Zip tie the anchor to the bottom side of the pole with 3 zip ties.
Stack — Use the back hole at the top and bottom of the pole to connect two parts together.
Extend — After a couple of stacks use a garden pole to add more strenght to the pole. Use zip ties for those as well

Printer size: Fits standard 180 × 180 mm beds. Scale up if you need extra height.
Material: PLA works great indoors; PETG for high-humidity cabinets.
Layer height: 0.2 mm.