This MINI doesn’t need to move to flex speed. White, orange, black — sharp, clean, loud. ⚡🚗🔥

If you are interested in my work and want to learn more about me and my creations, follow me here: [https://linktr.ee/Terry.creation](https://linktr.ee/Terry.creation). 

I’d greatly appreciate your support on Buy Me a Coffee: [https://ko-fi.com/terrycreation](https://ko-fi.com/terrycreation). 

For commercial licenses, visit: [https://patreon.com/TerryCreation](https://patreon.com/TerryCreation).

Printing Instrutions

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 220x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.7mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Orange Transmission Distance: 7
This print uses 5 unique filaments

Swap Instructions:
    Start with Ivory White
    At layer #18 (0.88mm) swap to Ash Gray
    At layer #26 (1.2mm) swap to Blue Gray
    At layer #34 (1.52mm) swap to Black
    At layer #46 (2mm) swap to Orange for the rest.