Lamp Switch Holder

Tired of always having to awkwardly fish out the light switch from behind your bed side table or your living room cabinet every time you want to turn on or off you lamp? With this convenient holder you can keep the light switch in a convenient place while still out of site but also easy to remove the switch if you need to move the lamp with no permanent modifications or damage to the switch or cabinet.

I got tired of always having to fumble behind my bed side table to find the lamp switch that was always just out of reach every time I wanted to turn it on or off but wanted an easy solution so that the lamp can easily be relocated.

Designed to be attached to any flat surface with either double-sided tape or using 2 x M3 counter sunk screws.

Suitable for most inline switches that are no bigger than 61x26.5x17.5mm. Full dimensions can be found in the photos.

Once mounted, simply push the switch into the holder. To remove, start by pulling one end of the switch out first and it will simply slide out.

I have tested this with PLA and TPU and found best results with TPU. If you are likely to want to take the switch out regularly, I recommend TPU as PLA works but if you are not carful inserting or removing the switch, I have found it can crack easy. 

The model in the photos was printed on a Bambu A1 with Bambu Lab TPU for AMS in black.

As always, any advice or recommendations are always welcome!

Happy Printing! :)