Description:
A compact and practical table, ideal for small spaces, workshops, garages. With its dimensions (23×25×21 cm), it fits even in places where space is really limited.

Features:

• Space-saving – perfect for small rooms or tight corners
• Simple and sturdy design
• Easy to print with no need for supports
• You can adjust the size in your slicer according to your printer’s build volume

Printing Tips:

• Recommended material: PLA or PETG
• Infill: 15–25% for standard use
• No supports needed
• When using infill - grid, the nozzle may occasionally scrape against the infill. In this case, reduce the print speed to 50% (even with this setting, the nozzle may still scrape, but there’s a low chance of the infill breaking)  and I recommend performing manual bed leveling of the print bed after the print is complete. [https://wiki.bambulab.com/en/x1/manual/manual-bed-leveling](https://wiki.bambulab.com/en/x1/manual/manual-bed-leveling) 
  I printed with grid infill, but I recommend using gyroid infill instead. 
• There is an option to use a 15mm thick wooden board.