Let me introduce you to a set of stylized statuettes representing the four elements. Feel free to scale them up or down as you like. 
There might be a bit of a battle with the supports, but nothing you can’t handle! 😄
 

All my photos are REAL and show an actual 3D-printed figure photographed by me.

If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at [https://patreon.com/29flo](https://patreon.com/29flo) and subscribe to a membership tier that suits you. Thank you!
 

[ Suggested Print Setup ]
Nozzle: 0.4mm
Layer Height: 0.2mm ( You can adjust the layer height based on how much detail you want ) 
Infill: 20%
Wall loops: 5
Supports: Tree (auto)
Printed with: BambuLab PLA Matte Charcoal and painted with metallic paints
 

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.