Mounting base to secure the Nintendo Switch 2 Camera to the Switch 2 dock and prevent the camera from getting moved out of position. 

Four different versions are available:

Rear: Positions the camera at the rear center of the Switch as close to the dock as possible, just overlooking the top of the console.

Front: Positions the camera in the front, center of the Switch. Cable guides are provided to route the USB cable for the camera under the switch to the back. The guides are sized based on the 3.7mm diameter of the cable that comes withe the camera.

Right: Positions the camera to the righthand side of the Switch, with clearance to prevent interference with the Joycon.

Left: Positions the camera to the lefthand side of the Switch, with clearance to prevent interference with the Joycon.

All models have been updated to provide a platform under the camera, to prevent the camera from sliding down too far when feet are added to the bottom of the mount.

Designed with air passages to provide space for airflow to maintain necessary cooling of the dock. 

Since the normal means of connecting the camera to the switch is to plug it into the top USB-C port, which i can interfere with the camera position and generally looks bad. I recommend to connect the camera directly to the dock instead. The dock has USB-A connections on the side. I recommend either using a USB-A to USB-C cable or better yet, use an angled USB-C to USB-A adapter that hides the cable's position, such as this one: [https://a.co/d/20AlHZ3](https://a.co/d/20AlHZ3)

I also recommend applying thin rubber feet at the corners under where the docks feet are, to reduce sliding.

No need for supports. 

Feel free to comment and provide feedback.