This is 4 colour Hueforge of Dancing Pair.

I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.
And thicker version with no border size 200x200. Swap instructions in profile description.

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

If you want stand for this print check out my Simple vertical stand.
For my Hueforge pictures with border choose the version with 3 mm gap.

Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Red  Transmission Distance: 3
    PLA BambuLab Basic Gold  Transmission Distance: 2.4
    PLA BambuLab Basic Jade White  Transmission Distance: 4.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #11 (0.96mm) swap to Gold
    At layer #14 (1.2mm) swap to Jade White for the rest.