Flames, skulls, and a biker jacket—printed into pure hellfire vibes 🔥💀🖤. Ghost Rider shows up, and it’s game on!

If you are interested in my work and want to learn more about me and my creations, follow me here: [https://linktr.ee/Terry.creation](https://linktr.ee/Terry.creation). 

I’d greatly appreciate your support on Buy Me a Coffee: [https://ko-fi.com/terrycreation](https://ko-fi.com/terrycreation). 

For commercial licenses, visit: [https://patreon.com/TerryCreation](https://patreon.com/TerryCreation).

Printing Instrutions

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 132x220mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #13 (0.68mm) swap to Gray
    At layer #20 (0.96mm) swap to Blue Gray
    At layer #25 (1.16mm) swap to Charcoal
    At layer #35 (1.56mm) swap to Scarlet Red
    At layer #41 (1.8mm) swap to Yellow
    At layer #46 (2mm) swap to Jade White for the rest.