Various arts of Luffy is featured on the box, "Monkey D Luffy” written in One Piece font give this deck box the look and style you will want to stand out at your local tournaments!

This carefully designed deck box has a card capacity of 100 Sleeved cards, or 60 Double sleeved cards with some more room and a spot for your most prized card to sit in the front to show it off (Ultra Pro Mini Snap Required. Link to the item is below)

In the lower compartment you will find a tray that slides out to store your extra accessories like dice, ability markers, tokens, or game markers!

Slicer settings:

When you input your Box art into your slicer make sure to change the top layer to Red. In Bambustudio: press Slice plate, then on the right hand side where the slider is, change the top layer to red filament. This will make it so your printer only has to change filament once!

You will require 8 (6x2mm) magnets as the lid and lower compartment slide on with a custom rail design, and are held my magnets.

You will also be required to glue all art pieces to the box as well. I used a Hot glue gun to do so, you can also use Super glue if you'd like

Video of assembly of a different box:

[https://www.tiktok.com/@zurc3d/video/7444427936880430392](https://www.tiktok.com/@zurc3d/video/7444427936880430392)

Details:
- Dimensions LWH in mm: 103 x 85 x 133
- Material: PLA
- Color: Red and White
- Care instructions: do not leave in direct sunlight or on hot surfaces, PLA melts at 210 Degrees Celcius but will soften at around 100 Degrees Celcius!

Ultra Pro Snap fit:

[https://www.amazon.ca/Mini-Snap-Standard-Card-Holder/dp/B07XYJ2M83/ref=asc_df_B07XYJ2M83/?tag=googleshopc0c-20&linkCode=df0&hvadid=706724960049&hvpos=&hvnetw=g&hvrand=12766550622186398103&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001325&hvtargid=pla-941229544047&psc=1&mcid=1a422568373c39bdad9f2eace79fc821&tag=googleshopc0c-20&linkCode=df0&hvadid=706724960049&hvpos=&hvnetw=g&hvrand=12766550622186398103&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001325&hvtargid=pla-941229544047&psc=1&gad_source=1](https://www.amazon.ca/Mini-Snap-Standard-Card-Holder/dp/B07XYJ2M83/ref=asc_df_B07XYJ2M83/?tag=googleshopc0c-20&linkCode=df0&hvadid=706724960049&hvpos=&hvnetw=g&hvrand=12766550622186398103&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001325&hvtargid=pla-941229544047&psc=1&mcid=1a422568373c39bdad9f2eace79fc821&tag=googleshopc0c-20&linkCode=df0&hvadid=706724960049&hvpos=&hvnetw=g&hvrand=12766550622186398103&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001325&hvtargid=pla-941229544047&psc=1&gad_source=1)