!!!PLEASE READ ALL!!!

Update: I found an issue with makerworld where when printing on machines other than the P1P the settings reset causing issues. I have fixed the issue by creating a profile for each printer.

• Designed for unenclosed printers (such as P1P).
• Prints at .2mm layer height with a .4mm nozzle.
• DRY YOUR PETG for at least 24 hours to absolutely ensure no moisture is present.
• Prints solid.
• I printed with Overture PETG which may behave differently than other versions

Key Settings:

• 1.02% flow ratio
• 15mm/s print speed
• 125mm/s2 acceleration
• Infill aligned in transparency direction
• 260C
• cooling below 30%