This cobra rises into a striking pose – mouth open, tongue extended, and covered in finely detailed scales. 

Clean lines and strong contrast bring out the power, tension, and realism of the scene.
A bold piece for reptile fans and anyone who appreciates a touch of wild energy.

Important Notes:

• Print with 100% infill
• Layer height: 0.08 mm
• First layer: 0.16 mm
• Model size: 200 × 200 mm
• Do not scale the Z-axis!
• Scaling the X and Y axes is fine.
• It’s perfectly normal for slicing to take a bit longer.

Filaments used:

• Black (#000000, Sunlu PLA+ Black) – Transition distance: 0.6
• Gray (#757575, BambuLab PLA Matte Nardo Gray)  Transmission Distance: 0.7
• Light Gray (#d1d3d5, BambuLab PLA Basic Light Gray) – Transmission Distance: 1.7
• White (#ffffff, BambuLab PLA Matte Ivory White) – Transition distance: 3.5

Color change instructions:

• Start with Black
• Layer #14 (1.2mm): switch to Gray
• Layer #18 (1.52mm): switch to Light Gray
• Layer #21 (1.76mm): switch to White and continue to the end

This model uses four filaments – perfect for a clean, high-contrast result with strong visual impact!