Superman Hueforge 2

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: [https://buymeacoffee.com/heyben](https://buymeacoffee.com/heyben)

Superman Hueforge 2

Print at 100% infill with a layer height of 0.04mm with a base layer of 1.1mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 1.12mm
The Max allowed Thickness is 4.32mm and the Actual Thickness is 3.28mm

Filaments Used:
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5.8
    #525557 PLA Chrominal Shadow Gray Transmission Distance: 3.4
    #000000 PLA BambuLab Basic Black Transmission Distance: 0.1
    #e72f1d PLA PolyLite Red Transmission Distance: 4.4
    #f1d335 PLA PolyLite Lemon Yellow Transmission Distance: 5.7
This print uses 5 unique filaments

***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time***

***the layer numbers will be different but the layer height will be the same***

Swap Instructions:
    Start with Jade White
    At layer #4 (1.24mm) swap to Shadow Gray
    At layer #19 (1.84mm) swap to Black
    At layer #21 (1.92mm) swap to Shadow Gray
    At layer #30 (2.28mm) swap to Red
    At layer #41 (2.72mm) swap to Lemon Yellow for the rest.

Check out my DC Universe Collection here

Check out my Hueforge Display Collection here (Frames, Stands, Book Nooks)

Check out my other models and hueforge files here

Don't forget to post pictures of your prints! Enjoy!

Descrição