Maggie Simpson Keychain

Please consider sending me a like or and a boost! :)

Project: Maggie STL.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x194.95mm in size
You may print at higher layer heights below the Min Depth of 0.88mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Dark Red Transmission Distance: 1.5
    PLA+ Sunlu Sky Blue Transmission Distance: 4
    PLA+ Sunlu Pure Yellow Transmission Distance: 5
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Dark Red
    At layer #13 (1.12mm) swap to Sky Blue
    At layer #17 (1.44mm) swap to Pure Yellow

*PAUSE during yellow. Change Black to White.

At layer #22 (1.84mm) swap to Ivory White

Descrição