Modular Wall-Mounted Coat Rack

🧱 Bill of Materials (BOM)
To complete one coat rack unit, you’ll need:

🖨 4x 3D printed parts (2 brackets, each made from 2 parts)
🌳 1x beechwood rod – 30 × 30 mm, length 950 mm
🔩 4x 4 × 20 mm screws – to fasten the wood rod to the brackets
🔩 1x M4 × 60 mm screw + nut – for assembling the upper part of each bracket
🔩 1x M4 × 30 mm screw + nut – for assembling the lower part of each bracket
🔩 2x 4,5 × 70 mm screws + Ø6 mm wall plugs – for wall mounting

All parts are easy to source from your local hardware or DIY store.

🛠 Assembly Instructions

Print the bracket parts
• Material: PETG
• Supports required
• Infill: 15–30% recommended
• Layer height: 0.2 mm

Assemble the two brackets
• Connect each pair of printed parts using:
– 1x M4 × 60 mm screw + nut
– 1x M4 × 30 mm screw + nut

Prepare and attach the wooden rod
• Cut the 30 × 30 mm wood rod to 950 mm (or any desired length)
• Fix it to the brackets using 4x 4 × 20 mm screws

Mount to the wall
• Mark wall holes using bracket slots
• Drill Ø6 mm holes and insert wall plugs
• Mount the rack with 2x 4,5 × 70 mm screws

✅ That’s it! A strong, minimalist wall-mounted coat rack – ready to go!

🔁 Modular & Scalable
Need more space? Just use a longer rod – or install multiple racks side-by-side.
The design scales easily and adapts to your needs.

📦 Printing Info
• Parts: 4 total (2 left + 2 right, to form 2 complete brackets)
• Print time: ~15 - 17 hours total
• Filament: ~750 g total

Descrição