Você está no 3DFinder
Buscamos em Thingiverse, MakerWorld e Printables ao mesmo tempo para te dar o melhor de cada uma.
Descrição
🐺 Ember Wolf – HueForge Bookmark Edition
Bold. Fierce. Designed to burn off the page.
This high-contrast HueForge design features a fiery wolf emerging from darkness — sharp, intense, and layered in rich reds and oranges. Whether you're into fantasy, folklore, or just love a striking design, this one's built to stand out.
The main profile is set up for Bambu Lab AMS, using four filaments for seamless, auto-swapped color transitions. A second profile is included for single-extruder printers, with pause points for easy manual swaps.
📐 Model Details:
- Size: 57.84 mm × 200 mm
- Layer Height: 0.08 mm
- Base Layer: 0.16 mm
- Infill: 100% (for clean HueForge contrast)
- Supports: None
- Brim: Recommended
- Depth Range: 0.48 mm to 2.2 mm
- Actual Depth: 2.3 mm
🎨 Filaments Used (4 colors):
- Black – PolyLite PLA Black (TD: 0.3)
- Red – BambuLab Basic Red (TD: 5)
- Orange – BambuLab Basic Orange (TD: 5)
- White – BambuLab Basic White (TD: 5)
🖨️ Main Print Profile – AMS Version
This profile is fully configured for Bambu Lab AMS with 4 color slots.
Just load and assign your filaments in the slicer as listed above — no manual swaps needed.
⏸️ Alternate Print Profile – AMS-Free (Manual Swaps)
Start with Black
🔁 At Layer #12 (1.04 mm): Switch to Red
🔁 At Layer #17 (1.44 mm): Switch to Orange
🔁 At Layer #21 (1.76 mm): Switch to White to finish
No AMS or multi-material system required — just pause, swap, purge, and print.
📦 Includes:
- AMS print profile
- AMS-free version with pause layers
- Depth-optimized STL for HueForge
- High-res photo previews
