Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x150mm in size
You may print at higher layer heights below the Base Thickness of 0.24mm
The Max allowed Thickness is 2mm and the Actual Thickness is 1.92mm

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.6
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    PLA BambuLab Basic Yellow  Transmission Distance: 6
    PLA BambuLab Basic White  Transmission Distance: 6
This print uses 5 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Red
    At layer #9 (0.8mm) swap to Pumpkin Orange
    At layer #13 (1.12mm) swap to Yellow
    At layer #16 (1.36mm) swap to White for the rest.