Hueforge of a T-Rex in a jungle.  The Model is 220x220mm in size.  

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the minimum depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Basic Black Transmission Distance: 0.6
    PLA eSun Bone White Transmission Distance: 5
    PLA Basic White Transmission Distance: 5

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Beige
    At layer #16 (1.36mm) swap to White for the rest.

Happy printing, enjoy!