Eassy cable guide for Bambu A1 mini. No more dangling printer cable.

Partially inspired by this design: 

[https://makerworld.com/en/models/528984-cable-guide-for-bambu-a1-mini-ji-chu-ji-usbxian-gu#profileId-446098](https://makerworld.com/en/models/528984-cable-guide-for-bambu-a1-mini-ji-chu-ji-usbxian-gu#profileId-446098)

I wanted to design a neat guide system that uses normal filament for support. This is what I ended up with.

When installing leave some gap for the filament in the ends. They might need some wiggle room.

My clips needed some cleanup after printing. I didn't want the filament too restricted in the clips so I used some abrasive filament (any CF or wood filled filament should do) to open the channels slightly.

I have attached the blender file if you need to make any adjustments. (You will if you want to use this for the A1)

You will also need to print this model:

[https://makerworld.com/en/models/980807-cable-guide-a1-mini#profileId-954363](https://makerworld.com/en/models/980807-cable-guide-a1-mini#profileId-954363)

Last thing I'll say is that this is probably not the best solution for this issue. Mostly I made it because I think it looks cool. You have been warned! :)