GP天线底座

上下需要用M10热熔螺母连接拉杆及地插，M头底座需要用M3热熔螺母固定

侧面地网使用4mm香蕉头母头热熔进去

香蕉头母座和地插之间使用线缆或者焊锡连接均可

GP Antenna Base

M10 heat-set nuts are used at the top and bottom to connect the telescopic whip and the ground spike. The SO-239 connector base needs to be secured with M3 heat-set nuts.

On the side, a 4 mm banana socket (female) is heat-set in place for the ground radial connection.

The banana socket and the ground spike can be connected using either a wire/cable or by soldering.