What a yummy looking apple that doubles as a container to hold your stuff!

The basket in the photos was designed by JamesThePrinter and can be found here. I scaled it up to max out the volume on a printer that has the volume of 350mm x 350mm x 350mm.

Required Hardware:

• (6) 6x3mm magents

Printing Instructions:

The 3mf file provided was saved using Bambu Studio and already has the following settings configured: Layer height: 0.2mm Supports:

• AppleTop: yes
• Everything else: no

Assembly Instructions:

You will need glue to fasten the stem and leave to the apple. Depending on the fitment of the magnets, you may also need glue to fasten those into place as well.

When fastening the magnets, make sure you align the polarity so that the magnets in the lid attract the magnets that are in the base.

You can use a heat gun or hair dryer to heat up the leaf and mold it to your liking. Just be careful not to burn yourself. You might want to use a set of pliers to hold the leaf while you heat it up.

Happy printing!

Feel free to join my discord for additional support, questions, or suggestions!