I made an articulated multi-colored skunk. You can print it multicolored with or without AMS. To print the model in different colors without ams you will have to use glue. 
Model description:
STL Body Whithout Fur is the skunk body without fur and head ( fur can be printed in white and glue them to the body ).
STL Body is a skunk body without a head.
STL Eyes are the skunk's eyes ( you can print them in different colors. Print the model with white color and the last 2 layers with black color, the layer height should be 200 microns )
STL Fur is the skunk's fur and hair ( you can print them in white and glue them on if you want a multi-colored skunk, but you don't have equipment for multi-colored printing like AMS ). For printing small models like STL Fur, use a brim for better adhesion of the model to the table. 
STL Head With Hairs And Nose is a skunk head with hair and nose but no eyes. 
STL Head With Hairs is a skunk head with hair but no nose or eyes.
STL Head Without Hairs is a skunk head without hair, nose and eyes.
STL Head is a skunk head with hair, nose and eyes. 
STL Nose is the skunk's nose. 
Some models are very small in size so I recommend not using a textured plate, a smooth plate is best. 
All models are printed without supports. 
If you print the nose, eyes and fur separately in a different color you will have to use glue to assemble. 

Don't forget to share your prints.

If you have any problems write to me

Don't forget to subscribe to me