Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA+ Numakers Pitch Black Transmission Distance: 0.1
    PLA+ Numakers Midnight Gray Transmission Distance: 0.2
    PLA+ Numakers Dark Grey Transmission Distance: 0.5
    PLA+ Numakers Simply Silver Transmission Distance: 0.5
    PLA+ Numakers Light Gray Transmission Distance: 0.7
    PLA+ Numakers Ivory White Transmission Distance: 4
    PLA+ Numakers Pure White Transmission Distance: 3.3
    PLA+ Numakers Cool White Transmission Distance: 1.8
This print uses 8 unique filaments

Swap Instructions:
    Start with Pitch Black
    At layer #8 (0.44mm) swap to Midnight Gray
    At layer #18 (0.84mm) swap to Dark Grey
    At layer #20 (0.92mm) swap to Simply Silver
    At layer #24 (1.08mm) swap to Light Gray
    At layer #30 (1.32mm) swap to Ivory White
    At layer #38 (1.64mm) swap to Pure White
    At layer #42 (1.8mm) swap to Cool White for the rest.