I resized the original model to 180x180mm because that's the size I like to print them on my A1 mini with. I also like to use Canadian Gamers frames which can be found here. [https://makerworld.com/en/models/173529#profileId-190705,](https://makerworld.com/en/models/173529#profileId-190705,) I print them at 90% to fit the 180x180 image.

DO NOT ADJUST THE Z AXIS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2mm and the Actual Depth is 2.1mm

This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Steel Grey
    At layer #13 (1.12mm) swap to Yellow
    At layer #19 (1.6mm) swap to White for the rest.