Project: 2pac westcoast.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 141.51x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA+ Sunlu Grey Transmission Distance: 2
    PLA+ Sunlu Silver Transmission Distance: 2
    PLA bambulab desert tan Transmission Distance: 0.9
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Grey
    At layer #15 (1.28mm) swap to Silver
    At layer #19 (1.6mm) swap to desert tan
    At layer #21 (1.76mm) swap to Jade White for the rest.
 

POUR CEUX QUI N ON QU UN SEUL AMS 

PAUSE LIGNE 20

NOIR-DESERT TAN