Modular design for an angled handgun rack. Available in 3, 4, or 5 gun configuration.

Designed to print flat with no overhang (or very little if you wish). Use 3 or more walls for optimal strength. The 5 gun config still fits a 256x256 build plate.

This model is designed and toleranced to be glue and fastener-free as an interference-fit assembly and only tested with a handful of my machines/filaments. It is reccommended to hammer the pieces together with a mallet. You can scale up/down the endplates accordingly by roughly 0.5-1% to achieve ideal tolerance.