Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.2x200mm in size.
 

You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Orange Transmission Distance: 7
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #13 (1.12mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Red
    At layer #17 (1.44mm) swap to Orange
    At layer #19 (1.6mm) swap to Yellow for the rest.