A Phoenix is a symbol of renewal and regeneration. It is associated with longevity and immortality as it is born from the ashes of its predecessor. It represents the triumph of life over adversity. I want to capture its birth as it rises from the molten landscape and takes its first flight.

Phoenix Rising Bookmark

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is  approximately 60x160mm printed.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.4
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA Default White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At height depth (1.16mm) swap to Red
    At height depth (1.52mm) swap to Yellow
    At height depth (1.76mm) swap to White for the rest.