Universal Video Projector Mount

I change my video projector recently and could not install it on its feet at the same place.
I designed this mount to be as universal / modular as possible:

The 3-points fixation has some degree of freedom, as it can slide along the wood and be reversed. If you have more the 3 points of attachments, print more screw holders.
There is 2 different sizes of screw holder so you should be fine !
The design allow for adjustment of “pitch” and "roll" angle of projection. The front piece of wood can be moved up and down and slightly twisted left or right.
It is designed for the installation on the picture (reversed on shelf) but it could 100% be the other way round.
Width of projector doesn't matter, just cut the wooden rod to the desired size.

Once you are happy with your angles just insert a small screw to fix the front wooden rod in place (see picture, in black). For the wood rod I used an easy to source 20mm diameter.

Design is a bit bulky, I would admit that ^^.

Hope it helps someone !

info: if it can help, on the picture it is a Epson EH-TW750

Descrição