This is a large, modular tasklight for 6500k white led strip light.
The components of this light are modular. If all the parts are used, as shown in the picture, it will use about 120cm of the 500cm from 1 LED strip. 
The arch design virtually eliminates shadows on the object you are illuminating.

To assemble
- Remove the print supports from the bottom of the bases. They should peel off easily using your hands.
- Assemble the rails using the small rectangular connector pieces in your preferred configuration.
- The back of the LED strip is double-sided tape. Peels the (blue?) backing and stick the led strip to the assembled rail.
- Pass the USB connector through the hole in the base and attach the rail to the base.
- Push the U shaped connectors to guide the cable around the base, exiting at one of the 3 viable positions.
- Once you are sure about this configuration, cut the LED strip at the opposite end of the rail at the nearest cut mark. 
  Click here and scroll down on the page to find the picture illustrating cut marks along the strip. 

- Slide the free end of the rail into the other base piece.
 

Note
The profile includes enough parts to create a light that is 4 feet wide and over 2 feet tall. I recommend keeping your hubris in check and not going beyond this size. Although this is not required by this project, the unused portion of the LED strip, can be purposed for more lamps or other projects by attaching a new USB quick connector, sold here: [https://us.store.bambulab.com/products/usb-a-to-2-pin-8mm-solderless-quick-connector-for-white-led](https://us.store.bambulab.com/products/usb-a-to-2-pin-8mm-solderless-quick-connector-for-white-led)