Guitar Strap Locking Clip

DT3D_PRINT GUITAR STRAP LOCKING CLIP

This is my guitar strap locking clip

The clip allows you to lock the guitar shoulder straps prone to falling and coming off.

**WARNING….DO NOT SWING GUITAR AROUND YOUR NECK WITH THESE CLIPS ON :)**

This clip will lock the strap in place & is easy to install and remove.

ASSEMBLY

Just align the strap button with the round opening on the underside, press down and forward until the clip locks in place
To remove, Just prise up the front of the clip and it should release.
The clip will fit on most guitars
Clips work better on thin straps, but will work on thick straps.

PRINT SETTINGS
POSITION AS ABOVE
AUTO TREE SUPPORTS
0.2 LAYER HEIGHT
4 WALL/LOOPS
BRIM
MAKE SURE YOUR LAYER ADHESION IS ADEQUATE