Project: storm trooper 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x134.68mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5

#00358e PLA BambuLab Basic Blue Transmission Distance: 4

#e2dedb PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue

At layer #12 (1.04mm) swap to Pumpkin Orange

At layer #17 (1.44mm) swap to Blue

At layer #19 (1.6mm) swap to White for the rest